Model B - $650.00

Model E $1050.00

Model D $850.00

The Model B comes equipped with an 1/8" PAB Gun, moisture trap, an 8lb abrasives mixing tank, safety valve, quick disconnect, regulator, and an air to abrasive adjustment valve.

The Model B is 17" tall, 12" around, requiring only a 2HP compressor and small cabinet, this little PAB pressure pot was designed to do all your small jobs and can go to craft shows or do names on office doors and car windows. It can be fitted with the finger operated PAB variable trigger pencil gun or the 1/8" PAB pistol grip variable trigger gun. Both guns use the 1/32" or 1/16" straight carbide tip.

The Model E is equipped with a 1/8" and a 1/4" gun each having its own air/abrasive adjustment valve, moisture trap, regulator, safety valve, quick disconnect, and carrying handle. The patented mixning tank will hold 40-50lbs of abraisive depending on the type used.

The Model E is 39.5 inches in circumference, 13 inches in diameter, and 17 inches tall. Net weight (without abrasive) is 30 lbs. This is the cadillac of the PAB systems. Designed for any blasting job from small awards to deep carved glass. For the beginner and the advanced artisan.

The Model D is equipped with either a 1/8" or a 1/4" gun, an air/abrasive adjustment valve, moisture trap, regulator, safety valve, quick disconnect, and carrying handle. The patented abrasive mixing tank will hold 40-50lbs of abrasive depending on the type of abrasive used.

The Model D is 39.5 inches in circumference, 13 inches in diameter, and 17 inches tall (or 20 inches to the top of the regulator. If you choose the 1/4 inch PAB Variable Trigger Gun and want the capability of using the smaller tips, we have a tip adapter available so that the smaller straight carbide tip can be used. This is great for your smaller jobs.